一,
The public positive pole (red wire +) is to supply power to the positive pole of each street light
The main flash (green line) is the word to make it flash (if you don’t want it flash, you can leave it alone)
Three-way circulation (yellow line) These three lines are respectively connected to the negative poles of the three colors of LED tubes on the running side. The positive pole is connected to the common positive pole. Remember that the positive pole must be connected in series with a resistor before it can be connected to the positive pole of the LED tube.
Straight bright output (white) is the word to make it bright
二，
The public positive pole (red wire +) is for the positive pole of each street lamp
Three-way loop (blue line) These four lines are respectively connected to the negative poles of the four colors of LED tubes on the running side. The positive pole is connected to the common positive pole. Remember that the positive pole must be connected in series with a resistor before it can be connected to the positive pole of the LED tube.
Straight bright output (white) is the word to make it bright
