There are more and more bridge lighting projects in urban lighting projects. Bridge lighting projects are an important part of the urban landscape. What are the basic steps in the construction of bridge lighting projects?
1. Determine the location of the lamps: Because the bridge lighting project is the construction of new lamps after the bridge has been completed, the lighting project is mainly to highlight the shape of the bridge and achieve the purpose of beautifying the city's night scene.
The lighting project lighting installation position directly affects the actual effect of bridge lighting and the difficulty of maintenance and management. The lamps are arranged too high on both sides of the bridge, and the light radiation and reflection effect are not obvious; at the same time, if the lighting lamps are positioned too high, the lamps are susceptible to damage from the outside, security risks and operation and maintenance costs increase. The installation position of the lamps is low, the construction operation and future maintenance are more difficult, and the bridge is affected by the light, and the long-distance effect is poor.
2. Laying of bridges and ducts: When laying bridges and ducts on the bridge, pay attention to the damage and influence on the existing bridge structure during the installation of the bridges and duct supports. Therefore, in the construction of the lighting project, the waste holes generated during the bracket installation are timely sealed with epoxy mortar to reduce the damage to the structure.
3. Lamps and equipment installation: The lamps and equipment installed in the bridge lighting project are different from the general lighting fixtures. Most of them are open-air operations. During the installation of the bridge lighting lamps and equipment, the lamps and equipment lines must be fully prepared Anti-aging and rain-proof work.
4. Luminaires and equipment anti-theft: Bridge lighting construction is the construction of new lighting installation projects outside the existing structure. All of the new additions are surface installations, and some of the lights are small in specific quantity, which will inevitably be affected by outsiders. Destruction and impact. In order to maintain the safe use of lamps and reduce damage, safety fences and protective covers are added to some lamps, and necessary protections are provided for lamps and ducts to reduce man-made damage.
5. Safety management of bridge lighting construction: urban bridge lighting construction, safety management is difficult. On the one hand, as the main channel of the city, the bridge has heavy traffic and large traffic volume, and the construction is seriously disturbed by the outside world. On the other hand, water flows under the bridge, and the lighting of the bridge is to install lamps on both sides of the bridge, which requires aerial and high altitude operations, which is more dangerous. Therefore, in the construction of the lighting project, safety management is difficult, and safety production requirements are high.
The bridge and the urban landscape are in a mutually associated relationship. The bridge lighting project should not only meet the transportation needs of the city, but also reflect the humanistic features and the main structure of a city.