The main functions of RDM series led point light source are:
1. Improve the quality of RDM signal transmission, ensure the stability of system control, and reduce the failure rate of the system;
2. Avoid the short circuit of AC high voltage reverse series lamps, lightning strike high voltage series, line short circuit and other faults that cause high voltage to flow back to the main control equipment of the lighting, thus affecting the stability of the system and causing the computer lamp console to be burned;
3. Simplify the stage lighting wiring system, reduce the cost of daily system maintenance, etc.
RDM signal amplifier performance characteristics:
● Support RDM standard protocol
● 1 input 8 output, 8 independently amplified RDM signal output
● Effectively improve the fidelity of RDM signal transmission
● Effectively improve the anti-interference ability of RDM signal
● RDM signal realizes photoelectric isolation technology
● Increase the effective communication distance of the transmission line and optimize the wiring of the stage lighting system
● Prevent high voltage backflow of mains power to the dimmer
● Prevent high-voltage backflow dimmer from lightning strikes
● Improve the safety, stability and reliability of the dimming system
The main technical parameters:
● Input voltage: 100-240VAC
● Power frequency: 50Hz/60Hz
● Electrical isolation performance: the insulation resistance of the input and output terminals is not less than 1000MΩ overvoltage protection
● Performance: system protection starting control voltage plus or minus 6Vm voltage
● Isolation voltage: greater than 5000V