Glass curtain wall is a product of architectural aesthetics, structure and function. Its appearance has changed the single form of expression of architecture and given the whole city a new feeling. Especially with the development of LED
Exhibition, it can be freely combined with the lightweight curtain wall system, providing architects with new freedom in material selection, and gradually transforming the traditional thick building facade into the lightweight exterior wall system.
The basic forms of combination of LED lamps and glass curtain wall facades can generally be divided into the following five types:
1. Exposed installation of curtain wall nodes: The exposed installation of curtain wall nodes adopts the fixed method of structural adhesive, which is the most common installation method in the lighting operation of glass curtain wall. It has obvious advantages: convenient and fast installation, and low operation difficulty; no
It will damage the curtain wall and can be installed at any required position to ensure the lighting effect;
2. Interior transparent installation of curtain wall: some curtain wall glass is not dark in color and has good transparency. It can be considered to install the light source on the inside of the curtain wall. This method will not cause any appearance change to the curtain wall, and it is invisible during the day
Good effect; The inner side of the curtain wall can be installed by pulling the steel wire rope. The secondary packaging LED point light source is designed with a steel wire buckle. After pulling the steel wire, it can be fastened directly at the right position. It is convenient and fast without affecting the lighting.
3. Track installation: first fix the wire slot at the bottom of the track to the decorative keel of the curtain wall, clip the point light source into the upper cover of the track in turn, and clip the upper cover of the track and the lamp together into the pre-installed wire slot. The aluminum slot can be installed together
The color of the decorative keel is the same. The light points can not be seen during the day, and the lights are shining at night.
4. Embedded installation: the light source is installed on the exterior facade of the building, and the installation of lamps is considered in the design of the curtain wall. Generally, the keel of the curtain wall is designed in the form of hollow upper and lower covers or grooves, and the light source can be directly fixed on the keel
On the one hand, it is easy to fix the upper bone cover or groove, on the other hand, it does not damage the building line, it is easy to achieve invisibility and maintain the beauty of the building in the daytime.
5. Perforated plate internal penetration installation: when the whole plate punching is used to install the led point light source, it is usually done on the aluminum plate or stainless steel plate according to the calculated position, and then the led
The led point light source passes through the back of the plate and connects it to the wire. This installation method of punching holes on the whole plate is also commonly used at present.