Jun 12, 2020

Glass Wall Building Facade Lighting Display

Leave a message

Glass Wall Building Facade Lighting Display, the combination of LED display technology and architectural design will attract more and more attention from architects. As long as the technology can be universally applied, it will gradually become a new architectural design trend.

Glass Wall Building Facade Lighting Display

Apply the latest technology to change the monotonous lighting effect of the building and make it colorful. The commercial value will be maximized and the energy will be used most effectively!


1. Lighting of colored glass

Colored glass is a material that is often used on large surfaces in modern buildings. Colored glass is mostly dark. The optical performance of the material is characterized by extremely low light transmittance and reflection coefficient, and high absorption coefficient. The traditional projection lighting method is often not available. Play a good effect.

Glass Wall Building Facade Lighting Display

This is because when the landscape lighting design floodlight illuminates the glass curtain wall from bottom to top, the reflected light hits the sky. At this time, the curtain wall looks black. If the lamp can be installed in a relatively high place, the glass curtain wall is illuminated from top to bottom. Only the reflected light from a certain part of the glass curtain wall hits the observer and is very dazzling, while the rest looks black.


2. Illumination of ordinary flat transparent glass

Compared to colored glass, transparent glass is both transparent and transparent. Obviously, the lighting method of the facade projection at this time neither meets the ecological requirements nor the aesthetic requirements. It is better to use the "internal light through external" lighting method. the result of.

Glass Wall Building Facade Lighting Display

The use of general indoor lighting and the placement of fluorescent tubes in the interior of the window are two commonly used methods. From the perspective of environmental protection and energy saving, this treatment method is not very ideal, and LED tubes are more energy-efficient.


3. Frosted glass lighting

Frosted glass is also called frosted glass. Due to its rough surface, it is only transparent and cannot be seen through, which causes diffuse reflection of light. The light passing through frosted glass is soft and has no dazzling feeling.

Glass Wall Building Facade Lighting Display

The lighting device uses the characteristics of frosted glass itself to reflect diffusely. At this time, it is necessary to deal with the color change of the lighting. The LED pixel light is rich in color (almost 80%-90% of the entire chromaticity coordinate). The color purity is very high, according to Different regional positioning or different time periods in different seasons produce beautiful lighting effects.


(Disclaimer: This article is only for learning and communication, our company does not assume any legal responsibility, if there is a violation of your rights, please contact us in time to delete)

Send Inquiry