Selection of lamps and lanterns—It is recommended to use narrow beam corrugated lamps to render the roof, which has a high degree of fusion with the roof ridge and can better represent the roof structure. Of course, the roof can also be illuminated with other lamps, each with their own advantages.
The corrugated lamp can be more integrated with the ridge, but the angle of the lamp is not easy to adjust after installation, which will affect the distance of light irradiation, as shown in the following figure: the brightness of the corrugated lamp will be weaker when the roof is steeper, and the relatively flat roof will be more Bright, we can choose the appropriate lighting fixtures according to this point; small floodlights to illuminate the trench is also a form of roof lighting.
The biggest advantage of this kind of luminaire is the adjustable angle, but the trench beam lighting has a beam angle and a projection angle. The sensitivity is high, and the flatness of the tile groove will affect the overall brightness of the light, so when you choose to use a small spotlight to represent the roof, you need to survey the roof tile groove, and you can make the lamp angle according to the width, depth, etc.
The control of the dark roof or the messy roof of the tile surface is generally difficult to achieve the desired effect. The self-luminous tile lamp can often achieve better results, but it can be said that the luminous tile lamp is not illuminated by the black tile. The bright and powerful product has many shortcomings, but it has a strong visual impact.
The roof media dynamic effect that is currently on the market is its masterpiece. Of course, the density of the lamp should be determined according to the slope of the tile ridge at the installation location. , Can not be the same, different slopes should take different lamp density.