Jan 18, 2019

Analysis laser white light illumination and automotive lighting

Leave a message

Analysis laser white light illumination and automotive lighting.Although the white light source produced by laser pumping has many advantages, its limitations must also be considered. Just like an LED-based lamp, the emitted light contains two distinct components: downconverted light from the phosphor, and the remaining unconverted laser.

1 Landscape lighting

The difference is that the biggest difference in the use of lasers is the inherent consistency, which leads to spots, that is, visible and dark spots appear on bright surfaces. These spots can not be ignored, the spots are not only distracting, but also have a negative impact on visual perception, hindering the detection of spatial details of the illuminated objects. Tests have shown that spots reduce visual acuity by 40%, reducing the ability to sense high and low spatial frequencies. These problems are part of the reason why direct laser lighting has not become popular. Please note that when using a laser projector, the speckle can be reduced to an acceptable level by some means to reduce the coherence of the laser. But with the laser illuminating the phosphor, the spots can even drop to a lower level. In this case, the spots are small and can be completely ignored. The best optical design ensures that most lasers are converted to longer wavelengths that do not emit spots, while the remaining lasers exhibit very small spots due to the multiple scattering that occurs as it passes through the phosphor layer. reduce. The phosphor-pumped laser system produces light, is rich in color, and has no spots, which is superior to the light produced by LED lamps.

The biggest drawback of laser-pumped white light sources is related to diodes. First of all, the price of this chip is much higher than LED. Although widely used in data storage applications, laser diodes are much more expensive than LEDs for equivalent levels of illumination. Due to the high cost, laser-pumped phosphor systems are expensive and can only be deployed in specialized, less cost-conscious lighting applications.

One advantage of a laser pumped illumination system is that it can cover a wide range of output power. Commercial laser diodes have power ratings ranging from a few milliwatts to a few watts, and a more powerful source can be formed by combining the outputs of several lasers. However, this is not conducive to the life of the system. This is because the diode life is lower than the lifetime of the LED, especially when they are operating at high drive currents. The reason for short lifetimes can be traced back to tiny, pre-existing crystal dislocations in the laser structure. These defects increase as the device is driven at high power. Running in this way will gradually form a wide network of dislocations, called dark line defects. They act as non-radiative composite sites, reducing the light output of the device. The brightness of the diode will decrease over time, and as the pump's source output drops, the brightness is too low until the light is off. However, as the maturity of laser diodes increases, the severity of these problems will diminish until they are eliminated.

Although LED lighting is undoubtedly the leader today, in the next few years, the laser system will develop rapidly.


Send Inquiry