Specific precautions for the electrical design of the park landscape lighting project: 1. Power distribution system: Generally, in the park landscape design, a 10kv substation is required to supply power to the power distribution boxes for each electricity consumption, so that it can save Cables can reduce energy consumption and improve the quality of power supply. However, the location of the substation should be located in the load center as much as possible, and its appearance and design should be as coordinated as possible with the surrounding environment. 2. Cable laying: Two factors should be considered when laying cables. One is the selection of cross-section, which must be determined by calculating two comprehensive indicators of current and voltage. The other is the method of burying. Choose direct burying or wearing protective pipes according to environmental characteristics. . 3. Safety protection measures: When designing the project, we must pay attention to the implementation of some safety protection measures, such as the installation of leakage protection devices. Some devices installed under water must use lamps with an anti-shock level of three. It is prohibited in the fountain Directly use submersible pumps with a voltage exceeding 12V.
In the actual design and construction process, there are still many precautions for the electrical design of the park landscape lighting project. Therefore, for the final effect and safety considerations, during the design and construction, we must choose a formal and powerful company to complete it. This is a relatively large project, and it cannot be sloppy in the slightest.