At present, the use of led point light source has become the choice of most people, but after purchasing the product, it still needs to go through an installation step, which is also very important, because the installation is in addition to the quality of the product itself. In the future, it is best to ask professional staff to carry out this work. Specifically, it is necessary to pay attention to the following three aspects when installing the LED point light source.
First, pay attention to the correct connection of the power cord
The power cord should be connected according to the instructions or the requirements of the drawings, and the power supply should be consistent with the working power of the LED point source, and the lamp and controller should be well connected. If you connect a lot of led point light sources beyond the original load of the wire, you should thicken the power cord or reconnect to another power cord to ensure the stability of the use.
Second, pay attention to the use of a reasonable installation method
In order to be more convenient for maintenance in the later stage, it is necessary to adopt a suitable LED point light source installation method, and reasonably arrange the controller and the electrical position. At the same time, although the LED point light source is used at night, it should also be considered that it cannot affect the daytime display effect after installation, and at the same time ensure that the product can be well fixed in the corresponding position when installing.
Third, pay attention to check
After all the wiring is connected, the LED point source manufacturer reminds that a comprehensive inspection should be done to ensure that the entire system can be used normally and safely. Therefore, it is necessary to check the details of the details one by one, in case any problems can be solved in time. Led point light source wholesale manufacturers introduced, such as the part of the wiring joint should avoid hitting the line, and use waterproof tape to separate the role of insulation, but also check whether the information line has the problem of reverse.
SH LED is a comprehensive high-tech enterprise engaged in the research, development, design, manufacture and marketing of LED outdoor lighting engineering lamps. Its products mainly include: LED line lights, LED guardrail tubes, LED point light sources, LED wall washers, etc. Suitable for commercial and outdoor lighting engineering products. Products used in real estate, commercial buildings, hotels, night KTV, park bridges and other lighting decoration projects. With stable products, it has become a cooperative manufacturer of many outdoor lighting engineering companies.
