Wall washer light is a relatively common lighting fixture, mainly for lighting the wall of the building, which is a surface light source.
For the lighting project how to choose the right LED wall washer, there are the following four suggestions.
1. Choose a regular wall washer manufacturer
Regular and powerful manufacturers are more trustworthy in terms of quality and technical support.
2. Choose the appropriate wattage LED wall washer light according to the height of the irradiation
The power and lighting angle of the lamps also affect the illumination height of the wall washer.
The higher the power, the brighter the wall washer and the higher the illumination height.
In the case of the same power, the smaller the beam angle is, the higher the irradiation height is.
We generally use a 30° lighting angle of the wall washer, 18W for 1-3 meters, 24W for 3-4 meters, and 36W for 4-5 meters.
Of course, there are no standards for these, and a specific analysis of the specific situation can allow the lighting manufacturer to give you a lighting solution suitable for the lighting scheme.
3. Select the color of the LED wall washer according to the design renderings
Wall washers are commonly used in monochrome and DMX512 external control.
As the name suggests, the color of the monochromatic wall washer has not changed, it has always been one color.
The color of the DMX512 wall washer can be changed, and various effects can be achieved by editing.
4. Select the power of LED wall washer according to the light absorption degree of the wall
The color and smoothness of the wall also have a certain influence on the power we choose for the wall washer.
Some walls are dark or uneven, which are more absorbing.
If the lighting is also 2 meters, in the case of appeal, we choose the power of the wall washer to be higher than the general power. Therefore, it is necessary to debug the situation on site to select a suitable led pixel bar.