The installation steps are roughly divided into wall line lamp installation and finished line lamp installation
Installation steps of the wall surface lamp
1. During hydropower construction, the wall is slotted to reserve power lines;
2. Install the frameless aluminum profile embedded parts in advance before painting the wall;
3. Putty and paint on the wall to cover the aluminum frame, after the completion of the lamp, the acrylic cover is attached to the surface;
4. The ceiling is brushed with decorative paint. In the early stage, the ceiling light-transmitting cover must be sealed with tape, and then uncovered after painting to leave a complete linear lighting effect.
Finished line lamp installation steps
1. Fix the position with screws
2. Align the aluminum slot with the card slot and press lightly
Note: Plan the wiring and slot well in advance to save trouble. The matching can be matched according to your own preferences. Too many colors of 2 or 3 lights will seem a bit messy.
